Monday, October 29, 2018

IMPORTANT INFORMATION FOR HEAVY SMOKERS AND FORMER SMOKERS

Catch the drift!

by William F. Muhr, Jr., M.D., D.A.B.R. CEO, South Jersey Radiology


YOU CAN CHANGE YOUR COURSE!

There is now more optimism and hope for heavy smokers and former smokers over the age of 55! Lung cancer, when diagnosed at its earliest stage, can be cured. An annual ultra-low dose, chest CT screening is the only tool ever make an impact on lung cancer mortality.

Today we all know the health hazards of smoking; however, there is a segment of the population that was unaware of the dangers of smoking when they began the habit. Whether you did or didn’t is immaterial, we want to help you today.

There are over 7000 chemicals found in cigarette smoke that not only harm your lungs, but the latest research indicates second-hand smoke may hurt those you love. Read more: http://njquitline.org/pdfs/NJ_7000Chemicals(2).pdf

So how can I change my course?

You can get screened annually with an ultra low dose CT scan here at SJRA. Why? It bears repeating: lung cancer, when diagnosed at its earliest stage, can be cured.  We look for early cancers and potentially pre-cancerous nodules which we can follow to distinguish whether they are benign or early cancers.

Should I get screened for lung cancer?

The American College of Radiology recommends the following: if you are a heavy smoker, were a heavy smoker, are between the ages of 55 and 80, smoked at least one pack of cigarettes a day for 30 years you should get screened.

Review this infographic: https://www.acr.org/-/media/ACR/Files/Lung-Cancer-Screening-Resources/Shared-Decision-Making-Infographic.pdf?la=en

How often?

Annual screenings are recommended for early detection. Early detection is still your best protection.

What can an annual lung screening do for me?

Research shows that annual screening with low-dose CT scans can reduce the risk of death from lung cancer for people in the high risk categories (noted above). These scans have about five times less radiation than conventional CT scans.

Unfortunately, lung cancer is often marginalized and not considered a crisis, but 158,000 people a year die from lung cancer, compared to 64,000 opiate deaths). Here at South Jersey Radiology, we want to help diminish lung cancer fatalities because we know we can and because we care.

Word of Caution

I would be remiss if I didn’t state that lung cancer screening is not a substitute for quitting smoking. Quitting, we know, can be very difficult.  I am providing some FREE resources on quitting smoking:

Pick up the phone and call NJ Quitline (free to the public): NJ Quitline/ 1-866-NJSTOPS (866-657-8677). They have live telephone coaches to help you and it’s free.

More Information

New Jersey State Funded Cessation Services  (Free to the Public)

  • Mom’s Quit Connection – 888-545-5191
    Free telephone or face to face cessation counseling for pregnant and parenting women and families.

 Privately Funded Cessation Services Available in NJ:
(Note: the following services may be offered at no, low or regular costs)     

  • Atlantic Health
    Call 800-247-9580, or go to the website, click on Classes and Screening and select “Hypnosis for Smoking Cessation” from the drop-down menu.
  • American Lung Association
    Quit services offered by the American Lung Association can be found by clicking http://www.lung.org/stop-smoking or by calling 800-586-4872.
  • HiTOPS, Inc.
    iQuit! Program for 13 to 27 year olds through counseling and possible Nicotine Replacement Therapy. Ivy Pearlstein 609-683-5155 x212 ivy@hitops.org
  • Shore Medical Center (Atlantic County)
    609-653-3440, quitcenter@shorememorial.org
    NOTE: This program services the community. Treatment by appointment.
  • Somerset Medical Center (Somerset)
    Dr. Chris Kotsen, 908-685-2442, ckotsen@somerset-healthcare.com
  • Tobacco Dependence Program, Rutgers, New Brunswick
    Cancer Institute of NJ, Robert Wood Johnson Medical School, School of Public Health
    125 Paterson Street, Suite 2300, New Brunswick, NJ 08903 | 732-235-8222 stopsmoking@rutgers.edu
    Contact Michael Steinberg, MD, 732 235-8222 or Donna Richardson, LCSW, LCADC, 732 235-8223


South Jersey Radiology remains the first in the region to provide 3D Mammography and is the ONLY diagnostic imaging firm in the area to receive the American College of Radiology’s Diagnostic Imaging Center of Excellence Award and the Breast Imaging Centers of Excellence. That means we have over 40 radiologists on our team who are highly specialized in different areas of the body. In addition, we have 12 locations to serve you; we are open seven days a week with early morning hours and late evening hours. #insistonSJRA

The post IMPORTANT INFORMATION FOR HEAVY SMOKERS AND FORMER SMOKERS appeared first on SJRA.

Monday, August 27, 2018

Tips and Tricks for Servicing Siemens Medical Imaging Equipment

Field service technicians and engineers who work on medical imaging systems need to have a lot of information stored inside their heads. Any time you can get a little helpful advice or learn about an easier way to accomplish a task, you’re saving some brain power.

That’s why, in addition to our training opportunities, Technical Prospects is always producing helpful videos for busy techs and FSEs.

We’ve collected our most-popular and informative Tech Tip videos and system maintenance videos to help those working with Siemens medical imaging equipment. Make sure to visit the Technical Prospects’ Video Library for more assistance as well as videos explaining our quality assurance process for Siemens replacement parts.

Visit our YouTube channel and subscribe so you’ll know when we upload something new!

1. An Easy Way to Clean Circuit Board Contacts
Who doesn’t love a good hack? If you’re running into problems where you’re always reseating network cards in order to make the system work properly, it could be oxidation on the circuit board’s gold contacts.

A basic pencil eraser can be used as a makeshift tool to quickly clean those contacts. Watch the video to hear more from our Director of Technical Engineering, Kevin Brinkman.

2. Replacing and Inspecting CT Brushes
In this video, Director of Engineering and Training Ken Hable gives some maintenance advice for CT brushes. He looks at all three types of brushes in a Siemens CT system: data brushes, low voltage brushes, and high voltage brushes.

Siemens recommends these brushes be checked at least twice a year, but what should you be looking for when performing a routine maintenance check? Ken will show you an example of what a worn-out brush looks like compared to a new one, so you’ll know when a replacement brush is needed.

One of the important tips Ken provides in this video is to make sure you reinstall brushes in their original spot and orientation inside the CT equipment. He’ll tell you an easy way to keep track when you click to watch the full video.

3. Inspecting CT Sliprings
Another one of Technical Prospects’ helpful videos shows you how to conduct a proper inspection of a Siemens CT slipring. This critical component of CT equipment should also be checked every six months.

Ken Hable will walk you through preventative maintenance of a Siemens Sensation CT system. You’ll need to use your hands and eyes to check for imperfections along the slipring. Ridges and burring on the slipring can cause CT brushes to wear out prematurely. Wearing of the contact brush can also create more dust in the environment, which could negatively impact the function of the machine.

So, what do you do if you find an imperfection on the slipring? Ken will show you the right tool to use and how to smooth everything out. Finally, see how our in-house expert recommends cleaning the slipring.

4. Why You Should Hand Rotate Gantries on CT Systems
Kevin demonstrates this tip on a Siemens Sensation, but it is relevant to any system with a rotating gantry. He strongly recommends rotating the system by hand after completing service or maintenance work on the CT.

Doing so can help you catch cables that might snag or loose nuts and washers that may have fallen inside the equipment. What can happen if you don’t double check things like that? Kevin will show you what a circuit board from our equipment looked like after a nut or washer got stuck inside. Hand rotating the gantry could save you some serious hassles.

5. Transporting Detector Cooling Units
Have you ever shipped a detector unit across the country and noticed the coolant level is lower after the unit reaches its destination? The only place that liquid would have gone is down onto the rest of the cabinet. Kevin says that’s no good, but what can you do?

We’ll show you an easy way to make sure there’s no leaking during transportation, including return shipping to Technical Prospects.

Source: Tips and Tricks for Servicing Siemens Medical Imaging Equipment

IMPORTANT INFORMATION FOR HEAVY SMOKERS AND FORMER SMOKERS

Catch the drift! by William F. Muhr, Jr., M.D., D.A.B.R. CEO, South Jersey Radiology YOU CAN CHANGE YOUR COURSE! There is now more optim...